The Periodic Inspection and Testing of an electrical installation has been recognised being an essential part of ensuring compliance with the requirements of The Electricity At the office Regulations 1989.
As most electrical installations suffer damage and deterioration throughout their operational life an electrical inspection and test is going to be required to read the safe operation from the installed installation.
The decision for the inspection and test to occur is usually instigated by a company assessing their Health and Safety policy. Because it is a requirement of the Health and Safety At the office Act 1974 that electrical systems set up in workplaces comply with the requirements The facility At the office Regulations 1989, more information mill introducing people and procedures to ensure that the organization, where reasonably practicable, introduce a Proactive Maintenance Programme and therefore results in a safe working environment.
Most electrical installations are designed and constructed to some high standard. But once cellular phone is within operation and under the charge of the owner problems can happen because of the following:
electrical installation testing
a) on a change of ownership or tenancy of the premises
b) on a change useful of the premises
c) after alterations or additions to the initial installation
d) due to any significant alternation in the electrical loading of the installation
e) high is reason to believe that damage may have been caused towards the installation.
The extension and modification of an existing installation can put added stress on a previously heavily loaded system thus leading to possible breakdown, premature failure as well as in severe cases even fire.
Using the introduction from the Electricity At Work Regulations 1989 it’s now become the legal responsibility from the owner (or even the owners nominated person) of the electrical installation to avoid electrical accidents. The regulations call for all electrical systems and apparatus that are, or may be, attached to the electrical installation, to become maintained in a safe condition to ensure that users might be protected against electrical shock or fire hazards.
Regulation 4 (2) from the Electricity At the office Regulations 1989 mandates that all systems and apparatus are maintained where this can prevent danger. The best approach to accurately decide when maintenance is necessary to prevent danger, would be to perform regular inspections and tests; consequently it may be construed that there’s a legal requirement to inspect and test. To guarantee the fixed wiring system is and continues to function correctly and safely, it is essential that a check mark and test is finished.